How To Adjust Shimano 105 R7000 Rear Derailleur. SHIMANO 105 - Front Derailleur - Clamp Band Mount - Road - 2x11-speed. The ST-R7000 shifters are for rim brakes or cable-actuated disc brakes.
Turn the B-tension adjust bolt to adjust the guide pulley to be as close to the sprocket as possible but not so close that it touches. Next set the chain to the smallest sprocket and re-peat the above to make sure that the pulley does not touch the sprocket. Shimano 105 RD-R7000 rear derailleur The Shimano RD-R7000 rear derailleur utilizes Shimanos Shadow RD low profile design and is available with both short and medium cage for wider gear range.
Shifting to the big time ring works as expected but when downshifting it takes 2 clicks to make it down fully.
Once the support bolt is in contact with the frame plate check the rear end of derailleur cage is still aligned parallel to the large chain ring. Adjust the inner stop so that there is just the minimum of clearance to the chain. Shimano 105 R7000 Rear Derailleur Fitting GuideTorque setting for Hex bolts- Mounting Bolt 8-10nm 5mm HexCable Pinch Bolt 6-7nm 4mm HexIf you would like. When doing so install the rear derailleur.
